Go Power 110W Commercial Solar Kit with 30A Charge Controller Kit
Pair your work or delivery truck with a 100W flexible solar kit to reduce idle time, extend battery life, and eliminate service calls due to dead batteries.
-
KIT INCLUDES:
- 110W Flexible Solar Module
- MMPT Charge Controller (30A)
- 20"™ Harness
- 30"™ Harness
- Perimeter Edge Tape
110W FLEXIBLE SOLAR MODULE: Solar Flex solar panels are designed to provide a powerful charging solution for batteries. Unlike other "˜thin"™ products, Solar Flex uses high-efficiency monocrystalline cells that produce more power per square foot than any other flat panel on the market. Built to withstand the harshest conditions.
-
FEATURES:
- High-efficiency, back-contact solar cells
- Penetrating or adhesive mounting option
- Curves up to 30 degrees
- Durable surface is less than 1/8 in (3 mm) thick
- Industry standard quick-connect cables (SC) work in series or in parallel
- Marine grade material
- Up to 82% lighter than other solar modules
- Solar output power limited warranty of 5 years
-
SPECIFICATIONS:
- Rated Power (Pm): 110W
- Maximum Power Voltage (Vmp): 17.6V
- Maximum Power Current (Imp): 6.31A
- Open Circuit Voltage (Voc): 22.08V
- Short Circuit Current (Isc): 6.60A
- Power Coefficient: -0.38% / °C
- Voltage Coefficient: -60.8mV / °C
- Current Coefficient: 2.2mA / °C
- Max Power Tolerance: +/- 5%
- Cell Type: Monocrystalline
- Solar Cell Efficiency: 21%
- Series Fuse Rating: 10A
- Maximum System Voltage: 600VDC
- Weight: 2.9 lbs (1.35 kg)
- Dimensions: 44.6 x 21.4 x 0.1 in (1134 x 544 x 3 mm)
- Frame Type / Material: DNP topcoat, includes stainless steel grommets
MMPT CHARGE CONTROLLER (30A): The industrial Maximum Power Point Tracking (MPPT) charge controller featuring a robust, fully-sealed (IP67) housing that resists vibration as well as dust-, insect- and water ingress. The MMPT ensures maximum performance and yield from all types of PV systems year-round and in any environment.
-
FEATURES:
- IP67 rated waterproof protection with SC solar connections and Delphi battery connections
- Up to 98% power conversion efficiency
- Advanced multi-peak tracking technology, allowing for better charging in shaded areas)
- Built-in over-temperature protection
- Temperature compensation and automatic adjustment of charge and discharge parameters
- Fully encapsulated design prevents damage from water, corrosion, insects and/or dust
- Works with 12 or 24V battery systems (automatic battery voltage detection)
- Supports lithium, sealed, vented, AGM, and flooded Lead Acid batteries
- Converts excess array voltage into additional charging current
- 5 year warranty
- 30A CONTROLLER ALLOWS FOR EXPANSION "” ADDITIONAL SOLAR MODULES
-
SPECIFICATIONS:
- Nominal System Voltage: 12/24VDC (Auto Detection)
- Max Solar Array Current: 30A
- Rated Charge Power: 450W/12V (900W/24V)
- Operating Consumption: <13mA/12V (<11.5mA/24V)
- Temp. Compensation: -25 mV/K in 12V systems (-50mV/K in 24V systems)
- Operating Temperature: 40 to 140 °F (-40 to 60 °C)
- Dimming Value" 0-100 % (0-10 V output)
- Battery Type: Lead acid (gel, AGM, flooded) adjustable, Lithium
- Humidity: 99% N.C.
- Dimensions (HxWxD): 6 X 5.1 X 2 in (152 X 128 X 43mm)
- Weight: 2.86 lbs (1297 g)
- Warranty: 5 years
- Safety Features:
- Battery Reverse Polarity
- Solar Array Reverse Polarity
- Over Temperature
- Over Current
- PV Short Circuit
- Battery Short Circuit
Original: $1,226.99
-65%$1,226.99
$429.45More Images
Go Power 110W Commercial Solar Kit with 30A Charge Controller Kit
Pair your work or delivery truck with a 100W flexible solar kit to reduce idle time, extend battery life, and eliminate service calls due to dead batteries.
-
KIT INCLUDES:
- 110W Flexible Solar Module
- MMPT Charge Controller (30A)
- 20"™ Harness
- 30"™ Harness
- Perimeter Edge Tape
110W FLEXIBLE SOLAR MODULE: Solar Flex solar panels are designed to provide a powerful charging solution for batteries. Unlike other "˜thin"™ products, Solar Flex uses high-efficiency monocrystalline cells that produce more power per square foot than any other flat panel on the market. Built to withstand the harshest conditions.
-
FEATURES:
- High-efficiency, back-contact solar cells
- Penetrating or adhesive mounting option
- Curves up to 30 degrees
- Durable surface is less than 1/8 in (3 mm) thick
- Industry standard quick-connect cables (SC) work in series or in parallel
- Marine grade material
- Up to 82% lighter than other solar modules
- Solar output power limited warranty of 5 years
-
SPECIFICATIONS:
- Rated Power (Pm): 110W
- Maximum Power Voltage (Vmp): 17.6V
- Maximum Power Current (Imp): 6.31A
- Open Circuit Voltage (Voc): 22.08V
- Short Circuit Current (Isc): 6.60A
- Power Coefficient: -0.38% / °C
- Voltage Coefficient: -60.8mV / °C
- Current Coefficient: 2.2mA / °C
- Max Power Tolerance: +/- 5%
- Cell Type: Monocrystalline
- Solar Cell Efficiency: 21%
- Series Fuse Rating: 10A
- Maximum System Voltage: 600VDC
- Weight: 2.9 lbs (1.35 kg)
- Dimensions: 44.6 x 21.4 x 0.1 in (1134 x 544 x 3 mm)
- Frame Type / Material: DNP topcoat, includes stainless steel grommets
MMPT CHARGE CONTROLLER (30A): The industrial Maximum Power Point Tracking (MPPT) charge controller featuring a robust, fully-sealed (IP67) housing that resists vibration as well as dust-, insect- and water ingress. The MMPT ensures maximum performance and yield from all types of PV systems year-round and in any environment.
-
FEATURES:
- IP67 rated waterproof protection with SC solar connections and Delphi battery connections
- Up to 98% power conversion efficiency
- Advanced multi-peak tracking technology, allowing for better charging in shaded areas)
- Built-in over-temperature protection
- Temperature compensation and automatic adjustment of charge and discharge parameters
- Fully encapsulated design prevents damage from water, corrosion, insects and/or dust
- Works with 12 or 24V battery systems (automatic battery voltage detection)
- Supports lithium, sealed, vented, AGM, and flooded Lead Acid batteries
- Converts excess array voltage into additional charging current
- 5 year warranty
- 30A CONTROLLER ALLOWS FOR EXPANSION "” ADDITIONAL SOLAR MODULES
-
SPECIFICATIONS:
- Nominal System Voltage: 12/24VDC (Auto Detection)
- Max Solar Array Current: 30A
- Rated Charge Power: 450W/12V (900W/24V)
- Operating Consumption: <13mA/12V (<11.5mA/24V)
- Temp. Compensation: -25 mV/K in 12V systems (-50mV/K in 24V systems)
- Operating Temperature: 40 to 140 °F (-40 to 60 °C)
- Dimming Value" 0-100 % (0-10 V output)
- Battery Type: Lead acid (gel, AGM, flooded) adjustable, Lithium
- Humidity: 99% N.C.
- Dimensions (HxWxD): 6 X 5.1 X 2 in (152 X 128 X 43mm)
- Weight: 2.86 lbs (1297 g)
- Warranty: 5 years
- Safety Features:
- Battery Reverse Polarity
- Solar Array Reverse Polarity
- Over Temperature
- Over Current
- PV Short Circuit
- Battery Short Circuit
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Pair your work or delivery truck with a 100W flexible solar kit to reduce idle time, extend battery life, and eliminate service calls due to dead batteries.
-
KIT INCLUDES:
- 110W Flexible Solar Module
- MMPT Charge Controller (30A)
- 20"™ Harness
- 30"™ Harness
- Perimeter Edge Tape
110W FLEXIBLE SOLAR MODULE: Solar Flex solar panels are designed to provide a powerful charging solution for batteries. Unlike other "˜thin"™ products, Solar Flex uses high-efficiency monocrystalline cells that produce more power per square foot than any other flat panel on the market. Built to withstand the harshest conditions.
-
FEATURES:
- High-efficiency, back-contact solar cells
- Penetrating or adhesive mounting option
- Curves up to 30 degrees
- Durable surface is less than 1/8 in (3 mm) thick
- Industry standard quick-connect cables (SC) work in series or in parallel
- Marine grade material
- Up to 82% lighter than other solar modules
- Solar output power limited warranty of 5 years
-
SPECIFICATIONS:
- Rated Power (Pm): 110W
- Maximum Power Voltage (Vmp): 17.6V
- Maximum Power Current (Imp): 6.31A
- Open Circuit Voltage (Voc): 22.08V
- Short Circuit Current (Isc): 6.60A
- Power Coefficient: -0.38% / °C
- Voltage Coefficient: -60.8mV / °C
- Current Coefficient: 2.2mA / °C
- Max Power Tolerance: +/- 5%
- Cell Type: Monocrystalline
- Solar Cell Efficiency: 21%
- Series Fuse Rating: 10A
- Maximum System Voltage: 600VDC
- Weight: 2.9 lbs (1.35 kg)
- Dimensions: 44.6 x 21.4 x 0.1 in (1134 x 544 x 3 mm)
- Frame Type / Material: DNP topcoat, includes stainless steel grommets
MMPT CHARGE CONTROLLER (30A): The industrial Maximum Power Point Tracking (MPPT) charge controller featuring a robust, fully-sealed (IP67) housing that resists vibration as well as dust-, insect- and water ingress. The MMPT ensures maximum performance and yield from all types of PV systems year-round and in any environment.
-
FEATURES:
- IP67 rated waterproof protection with SC solar connections and Delphi battery connections
- Up to 98% power conversion efficiency
- Advanced multi-peak tracking technology, allowing for better charging in shaded areas)
- Built-in over-temperature protection
- Temperature compensation and automatic adjustment of charge and discharge parameters
- Fully encapsulated design prevents damage from water, corrosion, insects and/or dust
- Works with 12 or 24V battery systems (automatic battery voltage detection)
- Supports lithium, sealed, vented, AGM, and flooded Lead Acid batteries
- Converts excess array voltage into additional charging current
- 5 year warranty
- 30A CONTROLLER ALLOWS FOR EXPANSION "” ADDITIONAL SOLAR MODULES
-
SPECIFICATIONS:
- Nominal System Voltage: 12/24VDC (Auto Detection)
- Max Solar Array Current: 30A
- Rated Charge Power: 450W/12V (900W/24V)
- Operating Consumption: <13mA/12V (<11.5mA/24V)
- Temp. Compensation: -25 mV/K in 12V systems (-50mV/K in 24V systems)
- Operating Temperature: 40 to 140 °F (-40 to 60 °C)
- Dimming Value" 0-100 % (0-10 V output)
- Battery Type: Lead acid (gel, AGM, flooded) adjustable, Lithium
- Humidity: 99% N.C.
- Dimensions (HxWxD): 6 X 5.1 X 2 in (152 X 128 X 43mm)
- Weight: 2.86 lbs (1297 g)
- Warranty: 5 years
- Safety Features:
- Battery Reverse Polarity
- Solar Array Reverse Polarity
- Over Temperature
- Over Current
- PV Short Circuit
- Battery Short Circuit
